Yamaha CVP-59S - Manual (Page 116)

113
The Connectors
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
■ AUX IN L/L+R and R Jacks
........................................................................................
• The input signal from the AUX
IN jacks is delivered to the AUX
OUT jacks, but is not affected
by the Clavinova’s volume
control or reverb effect.
These jacks are intended primarily for use with
external synthesizers or tone generator modules.
For example, the outputs of the synthesizer/tone
generator can be to the Clavinova AUX IN jacks, al-
lowing the sound of the synthesizer/tone generator to
be reproduced via the Clavinova’s internal amplifier
and speaker system. For monaural signal input (when
the connected device is monaural), use only the L/
L+R jack.
Although the Clavinova is a self-contained musical instrument that
simply be plugged into the AC mains outlet and played, it also
features a number of connectors for system expansion.
Tone Generator
AUX IN
L/L+R R
■ AUX OUT L/L+R and R Jacks
..................................................................................
• The AUX OUT jack signal must
never be returned to the AUX
IN jacks, either directly or
through external equipment.
The AUX OUT L/L+R and R jacks deliver the
output of the Clavinova for connection to an instru-
ment amplifier, mixing console, PA system, or record-
ing equipment. If you will be connecting the
Clavinova to a monaural sound system, use only the
L/L+R jack. When a plug is inserted into the L/L+R
jack only, the left- and right-channel signals are com-
bined and delivered via the L/L+R jack so you don’t
lose any of the Clavinova’s sound.
■ MIDI IN, THRU and OUT Connectors
(MIDI IN and OUT on the CVP-59S)
...................................................................
The MIDI IN connector receives MIDI data from
an external MIDI device (such as a synthesizer, se-
quencer, music computer, etc.) which can be used to
control the Clavinova. The MIDI THRU connector
provided on the CVP-79A, 69, and 69A re-transmits
any data received at the MIDI IN connector, allowing
“chaining” of several MIDI instruments or other de-
vices. The MIDI OUT connector transmits MIDI data
generated by the Clavinova (e.g. note and velocity
data produced by playing the Clavinova keyboard).
CVP-79A/69/69A
THRU IN
MIDI
OUT
MIDI Sequencer Tone Generator
Stereo System
AUX OUT
L/L+R R
An optional Yamaha FC7 Foot Controller can be
plugged into this jack for foot volume (expression)
control of the keyboard sound only (i.e. expression
doesn’t affect the auto-accompaniment sound or disk
playback). Press the pedal forward to increase volume,
and backward to decrease volume.
■ EXP PEDAL Jack (CVP-79A)
....................................................................................
EXP PEDAL