Xantrex Technology MS2000 - Manual (Page 5)

975-0125-02-01 iii
About This Guide
Purpose
The MS2000 Sine Wave Inverter/Charger Operation Guide provides explanations
and procedures for operating, configuring, and troubleshooting the MS2000 Sine
Wave Inverter/Charger (MS2000).
Scope
The guide provides safety guidelines and information about operating,
configuring, and troubleshooting the unit. It does not include installation
information or battery information. Refer to the MS2000 Sine Wave Inverter/
Charger Installation Guide.
For detailed information about particular brands of batteries, you will need to
consult individual battery manufacturers.
Audience
The guide is intended for users who need to operate, configure, and troubleshoot
the MS2000 Sine Wave Inverter/Charger.
Organization
This guide is organized into four chapters and three appendixes.
Chapter 1, “Introduction”, outlines the main performance and safety features of
the MS2000 Sine Wave Inverter/Charger. Reading this chapter will give you a
clear understanding of the inverter/charger’s capabilities.
Chapter 2, “Operation”, provides information about operating the MS2000.
Details are provided on how to read the front panel indicators to monitor the
MS2000.
Chapter 3, “Configuration”, explains how to configure the MS2000 from the
control panel.
Chapter 4, “Troubleshooting”, explains how to identify and solve problems that
can occur with the MS2000.
Appendix A, “Specifications” provides electrical, physical, and performance
specifications for the inverter/charger. It also provides Echo Charger
specifications.
Appendix B, “Battery Charging Reference for the Main Charger” provides
information on three-stage charging, two-stage charging, and charging times.
Appendix C, “Terminology” provides a glossary and a listing of commonly used
abbrevations and acronyms.