Pc settings mode [3 pc set – SUUNTO Gekko User Manual
Page 44

42
4.1.2. Dive History Memory
[2 HISTORY]
The Dive History is a su mmary of al l the d ives
recorded by the dive computer. To enter the Dive
History Memory Mode select MODE- MEMOR Y-
HISTORY (Fig. 4.12.).
The following information will be sho wn on the
display (Fig. 4.13.):
• the maximum depth ever reached
• the total accumulated dive time in hours
• the total number of dives.
The Dive History M emory c an hold a maximum
of 999 di ves and 999 di ving hours. When these
maximum values are reached, the counters will start
again from zero.
4.1.3. PC Settings Mode
[3 PC SET]
Although the Gekko does not support PC-download,
the tissue calculations can be reset and all settings
returned to factory defaults using a PC-Interface cable
and special software. This feature is useful for dive
shops and their rental units only. The software is not
available to the general public.
To enter the PC Settings mode select MODE- 1
MEMORY- 3 PC SET (Fig. 4.14.).
NOTE!
While in the PC SET mode, the connector/
water contacts are used only for the data transfer .
The Dive Mode IS NO T automatically activated if
the contacts are submerged.
Press the SMART (Quit) to exit PC SET mode. If a
button is not pressed or no data is transferred within
5 minutes, the instrument beeps and returns to the
timekeeping display automatically.
Fig. 4.14. Data Transfer
mode. [3 PC SET].
Fig. 4.15. Setting Options.
[4 SET].
Fig. 4.13. Dive History
information. Total number
of dives, dive hours and
maximum depth.
MAX
TIME
DIVE
DIVE
QUIT
SELECT
QUIT
OPTIONS