SUUNTO Vyper Air User Manual
Vyper air
Table of contents
Document Outline
- SUUNTO_VYPER-AIR
- Table of Contents
- 1. WELCOME TO THE WORLD OF SUUNTO DIVE COMPUTERS
- 2. WARNINGS, CAUTIONS, AND NOTES
- 3. SUUNTO USER INTERFACE
- 4. GETTING STARTED
- 5. BEFORE DIVING
- 5.1. The Suunto RGBM/Deep Stop Algorithm
- 5.2. Emergency ascents
- 5.3. Dive computer limitations
- 5.4. Audible and visual alarms
- 5.5. Error conditions
- 5.6. Wireless transmission
- 5.7. DIVE mode settings
- 5.7.1. Setting the depth alarm
- 5.7.2. Setting the dive-time alarm
- 5.7.3. Setting the nitrox values
- 5.7.4. Setting the personal/altitude adjustments
- 5.7.5. Setting the sample rate
- 5.7.6. Setting the Safety Stops/deep stops
- 5.7.7. Setting the RGBM values
- 5.7.8. Setting the units
- 5.7.9. Setting the tank pressure alarm
- 5.7.10. Setting the tank pressure
- 5.7.11. Setting the HP code
- 5.8. Activation and pre-checks
- 5.9. Safety Stops
- 5.10. Deep stops
- 6. DIVING
- 7. AFTER DIVING
- 8. CARE AND MAINTENANCE OF MY SUUNTO DIVING COMPUTER
- 9. BATTERY REPLACEMENT
- 10. TECHNICAL DATA
- 11. INTELLECTUAL PROPERTY
- 12. DISCLAIMERS
- 13. SUUNTO LIMITED WARRANTY
- 14. DISPOSAL OF THE DEVICE
- GLOSSARY