SUUNTO Gekko - Manual (Page 15)

13
Press the SMART (MODE) button
• To activate the dive computer.
• To change from the Surface Mode to the
menu based modes.
• To select, confi rm or quit a submode (short
press).
• To immediately exit any submode to the
Surface Mode (long press).
Press the arrow up scroll (PLAN) button
• To activate the timekeeping display, if the
display is blank.
• To activate the Dive Planning in the Surface
Mode.
• To make a special bookmark in the profi le
memory during a dive.
• To scroll up the options (V, increase).
Press the arrow down scroll (ALTER) button
• To activate the timekeeping display, if the
display is blank.
• To activate the alternative display(s).
• To scroll down the options (W, decrease).
The dive computer is controlled with the SMART
(MODE/On/Select/OK/Quit)
and the PLAN V and
TIME W push b uttons and with the w ater contacts
as follows:
Activation
press the SMART (On) button
or immerse the instrument
in water for fi ve (5) seconds.
Dive
Planning in the Surf ace Mode, press the
PLAN (s) button.
Menu Modes press the SMART (MODE)
b utton.