beautypg.com

Diving in nitrox mode 3.4.1. before diving, Warning – SUUNTO Gekko User Manual

Page 29

background image

27

3.4. DIVING IN NITROX MODE

3.4.1. Before Diving

The GEKKO can be set for diving with standard air only (Air mode) or it can be

set for diving with Enriched Air Nitrox (Nitrox mode). If you are educated for

nitrox diving and you plan to make nitrox dives, it is recommended that you set

the dive computer permanently to its NITR OX Mode. The Nitrox mode can be

enabled by accessing MODE-SET-MODEL (see chapter 4.2. “Set Modes”).
If set to Nitrox mode, the correct oxygen percentage of the gas in your c ylinder

must always be entered into the computer to ensure correct nitrogen and oxygen

calculations. The dive computer adjusts its mathematical nitrogen and oxygen

calculation models according to the entered O2% and PO2 v alues. Calculations

based on Nitrox use result in longer no-decompression times and shallo wer

maximum depths than diving with air. When the dive computer is set in Nitrox

mode the Dive Planning modes calculates with the O2% and PO2 values that are

currently in the computer.

WARNING!

DO NOT DIVE WITH A CYLINDER OF ENRICHED AIR IF YOU HAVE

NOT PERSONALLY VERIFIED ITS CONTENTS AND ENTERED THE

ANALYSIS VALUE INTO YOUR DIVE COMPUTER!
Failure to verify cylinder contents and enter the appropriate O

2

% into your dive

computer will result in incorrect dive planning information.

Fig. 3.19. Ceiling and Floor

Zones. The Recommended

and Manadatory Safety Stop

zone lies between 6m and

3m [20 ft and 10ft].

WARNING!

The dive computer will not accept fractional percentage v alues of oxygen

concentration. Do not round up fractional percentages. For example, 31.8%

oxygen should be entered as 31%. Rounding up will cause nitrogen percent-

ages to be understated and will af fect decompression calculations. If there

is a desire to adjust the computer to provide more conservative calculations,

use the personal adjustment feature to affect decompression calculations or

reduce the PO

2

setting to af fect oxygen e xposure according to the entered

O

2

% and PO

2

values.

3m / 10ft

6m / 18ft

CEILING

FLOOR