Zebra Technologies TTP 8000 - Manual (Page 14)

Product Presentation
Feed Button 14
P1003638-003 TTP 8000 Technical Manual 10/19/2009
Feed Button
When you have inserted the paper under the printhead, press the Feed button and the printer
will feed it forward, cut and eject a printout, then switch to on-line mode. Each press on the
Feed button will feed, cut, and present one form length.
Using the Feed button:
Is there paper in the presenter section of the printer?
When auto-loading paper, and the paper does not feed straight:
1. Press the Feed button once to stop the loading process.
2. Correct the error.
3. Press the Feed button once more to commence with the loading.
When loading paper manually:
1. After closing the printhead, press the Feed button to feed-cut-eject one page.
2. Press and hold the Feed button while turning on the power to print a self-test printout. See
page
Making a Test Printout on page 21 .
If… Then…
No Press the Feed button once to make a Form Feed. (Feed, cut, and present a
complete page.) In black mark mode, the page will be synchronized with the
black mark.
Yes Press the Feed button once to clear the presenter.