Weil-McLain PLUS LINE PLUS-E017-A/1206 - Manual (Page 41)

Part Number PLUS-E017-A/1206 1
Manual
• Installation • Start-Up • Usage • Maintenance • Parts
Figure 25
Dedicated single boiler with
single water heater
In commercial application
(typically PLUS 100/110/119).
• Locate flow/check valve as close
as possible to water heater boiler
side connections — to reduce
heat loss between cycles.
1. These drawings are conceptual only. They show representative piping components and
layout. Weil-McLain does not represent that the drawings meet any particular mechanical
or building codes. The installer is responsible for inclusion of all required safety devices, or
other miscellaneous piping hardware not shown on drawings. The installer is responsible
for proper sizing/selection of all hardware shown on this diagram.
2. See Weil-McLain installation instructions for specific details on installing the boiler.
. Recommended piping for GOLD Plus 0/0/0/80 water heaters used in commercial
applications.
Notes
C
Boiler-side piping
(except Gas)
continued