Westinghouse SE 6000 User Manual
Page 79
4-28
S
ECTION
4: M
ASTER
F
ILE
E
NTRY
SE 818 D
EVICE
C
ONFIGURATION
E
NTRY
[d818entr]
Complete the [d818entr] screen for all 818-series and NexSentry ACUs (use F2 to display the
screen after the previous screen, [d808entr] or [nexsentr], have been stored). A sample screen
follows:
PIN Seed. Optional. Enter the base seed number for generating PINs. The value entered
has priority over the system default PIN seed value entered with the [pndfentr] screen (see
SE 422 Pin Definition in this section). Default is 0.
Duress PIN Digits. Optional. Enter the allowed number of digits for a PIN duress code.
Default is 0.
Print PINs. Optional. A Y / N field indicating if the PIN should be displayed once calculated.
Default is Y.
"
PIN Timeout. Optional. Enter the maximum number of seconds allowed between key
presentation and PIN entry. Default is 10.
#
Max PIN Retries. Optional. Enter the allowed number of PIN entry retries. Default is 4.
$
VIP Only Digits. Optional for keypad-controlled doors only. Enter the allowed number of
digits for the PIN (4—8). Default is 4.
%
Duress Report. Optional. Enter an action report number (1—32) indicating the action the
ACU is to take should a duress event occur. Default is 0.
&
Duress Enable. Optional. A Y / N field indicating whether the duress feature is enabled.
Default is Y.
SE 422 D
EVICE
C
ONFIGURATION
E
NTRY
[d422entr]
Complete the [d422entr] screen for SE 422 ACUs (use F2 to display the screen after the previous
screen has been stored). A sample screen follows:
1
2
"
#
$
%
&