Westinghouse SE 6000 - Manual (Page 76)

S ECTION 4: M ASTER F ILE E NTRY 4-25
Power Fail. Optional. Enter the power fail report number if a report has been created (see
applicable ACU manual). The report states the actions that will be taken by the ACU should
a power failure occur. Default is 0.
"
Override. Optional. Enter the operator override report number if a report has been created
(see applicable ACU manual). The report states the actions that will be taken by the ACU if,
for example, a manual unlock or a shunt occurs. Default is 0.
#
Type. Optional. Enter the number for the key type used. Default is 0.
N
OTE
The valid key types are as follows:
0 — None
1 — 1030
2 — 1040
3 — 1050
4 — 1060
5 — 1050 / 1060 / Digital Keys
$
Aux. Type. Conditional. Auxiliary key type. A second key type, other than the one entered
in the previous field, can be entered here if applicable. Default is 0.
0 — None
1 — 1030
2 — 1040
Note: the previous two fields are applicable only to devices that support multiple key types.
%
Facility. Required for key types 1 and 2 (previous field). Enter the facility code assigned to
the keys. Defaults to **** if omitted.
&
Alt Facility. Conditional. Enter a second facility code to allow a different set of keys to be
used with this ACU. Defaults to **** if omitted.
'
Auto Forgive. Optional. Up to four time codes can be entered that execute the forgive
command at the ACU. Default is 0 (feature disabled if all auto-forgive time codes are 0).
808 Modem Definition. Not used.
Number of Retry Times. Not used.
XON/XOFF. Not used.