Westinghouse SE 6000 - Manual (Page 71)

4-20 S ECTION 4: M ASTER F ILE E NTRY
The SE 6000 can run different pollers or multiple copies of the same poller concurrently but, with
the exception of the NexSentry, 8xx-series, and 422 ACUs, the pollers can be run with one device
type only. Poller parameter files are read when the poller programs start. The parameters define
the poller type, the physical port assignment, and other required control information.
Twenty-two poller types are currently in operation (codes 5, 20, 21, and 23 are not used):
1 708P — 708P ACU
2 Opto — Optomux 22 alarm monitor
3 Etp - Rdu — Stellar RDU 2000 monitor
4 Timer Poller — Interactive extended processing poller
6 808 — 8xx series / SE 422 ACUs
7 MCCI — MCCI keypad
8 Parking — Parking controller—Internal: No physical connection
9 Remote Dialer Schd — Remote dial-up interface controller
10 Elevator — Elevator control poller—Internal: No physical connection
11 Database — Database poller—Internal: No physical connection
12 Burle — Burle closed-circuit television (CCTV)
13 Vicon — Vicon camera switcher
14 Hand Geometry — Supports up to 32 hand geometry readers
15 Amdi — Amdi 102 / 103 magnetic stripe readers (supports up to 16)
16 Radionics — 6000/6500 Receiver
17 Nesting — Nested parking timer
18 Polaroid Server — Not used for Polaroid ID 4000
19 WSE XV Poller — Used for capturing images on an X-Terminal
22 WSE VIP2 Poller — Used with numeric keypad for entry of PINs
24 American Dynamcis — Closed circuit television (CCTV)
25 Pacom CCTV — Closed circuit television (CCTV)
26 Intercom System — Used to automatically switch cameras
A sample [pol_entr] screen follows:
Poller ID. Required. Enter a four-digit maximum poller number. There is no default for this
field.
Poller Description. Optional. Enter a 20-character maximum description of the poller. If
omitted, the poller ID number is inserted by default.
2 1
"
#
$
%
&