Westinghouse SE 6000 - Manual (Page 61)

4-10 S ECTION 4: M ASTER F ILE E NTRY
Access Code ID. Required. Enter a four-digit maximum access code number.
Tenant. Required (zoom available). Enter a four-digit maximum tenant code number.
Default is tenant 0.
Download Device ID. Optional (zoom available). This field must be used if the access code
being created is to be downloaded to an ACU—enter the ACU ID number. Enter 0 (default)
if access decisions for this code are to be made by the host.
"
Code Description. Required. Enter a 30-character maximum description of the access
code, e.g., REGULAR DAY SHIFT, WEEKEND RECEIVING.
When screen entry is completed press F6 to store the data; the access code definition screen,
[acodentr], displays automatically.
A
CCESS
C
ODE
D
EFINITION
[acodentr]
This screen is used to enter the reader ID and time codes (four maximum per reader) that will apply
to this access code. Each reader ID entered must be added (F5) and stored (F6) individually. When
you finish data entry for this screen, press F6 again to store the completed access code definition.
A sample screen follows:
Note that this action may only be done for readers defined as elevator reader types in the reader
definition screen.
If this access code is to be
assigned to an elevator
reader, press F2 after en-
tering the Reader ID and
Time Code fields. See El-
evator Access Codes—fol-
lowing subsection.
1 2
1
2
"