Westinghouse SE 6000 - Manual (Page 69)

4-18 S ECTION 4: M ASTER F ILE E NTRY
Point ID. Required (zoom available). Enter the point ID to which this instruction applies.
Tenant. The tenant number entered when this point was created is automatically entered
into this field.
Instructions. Eight 40-character lines are provided for detailed instruction entry. Refer to
the sample screen for an example.
HARDWARE CONFIGURATION [confmenu]
The hardware configuration item in the master file entry menu displays the hardware configuration
menu [confmenu]:
• Zones • Device Report Definition
• Areas • SE 422 PIN Definition
• Pollers • SE 422 Hardware Definition
• Devices • Dialer Entry
• Readers • Site Entry Definition
• Points • ABA Configuration Entry
• Auto Opens/Activates • DKR Configuration Entry
Z
ONES
[
ZONEENTR
]
Zones comprise user-selected system components grouped to facilitate system operation and
administration, and are required if the anti-passback feature is to be used. Zones may be defined
for vehicles as well as keyholders. A sample [zoneentr] screen follows:
Zone Number. Required. Enter an four-digit maximum zone number. There is no default
for this field.
Zone Name. Optional. Enter a 30-character maximum tenant name. If this field is omitted,
the system fills the field with asterisks.
1
2
#
"