Westinghouse SE 6000 - Manual (Page 77)

4-26 S ECTION 4: M ASTER F ILE E NTRY
! Building Closed Time Codes. Optional. Provides up to four time intervals during which the
building should be closed. Default is 0.
" Building Open Reminder. Optional. If the building should be closed (indicated by the time
codes entered in the previous field), a reminder message is logged and repeated for the
number of minutes specified (0 to 240). Default is 0.
SE N
EX
S
ENTRY
D
EVICE
C
ONFIGURATION
E
NTRY
[nexsentr]
Complete the [nexsentr] screen for the NexSentry ACU and then press F2 Next Form to display
the [d818entr] screen. Enter all appropriate information and press F6 Store to complete the
NexSentry device configuration. A sample [nexsentr] screen follows:
Level, Name, Password. Required. These first three fields are entered to identify up to eight
operators who will be permitted to set/change system parameters for a particular ACU from
the ACU terminal port. User 1 must be established (defaults to operator 1); operators 2
through 7 are optional. Enter the operator's security code (A through F), name and password.
The security codes A through F control the degree to which the operator may add/change/
delete the system parameters from the ACU terminal port. Code A has the most privileges,
code F has the least. For detailed information concerning operator privilege levels, refer to
the applicable ACU manual.
2
1
"
#
$
%
& '
11