Wegener Communications UNITY 4600 User Manual
Page 49
U
NITY
4600 U
SER
’
S
M
ANUAL
www.wegener.com
41
800032-01 Rev.F
RP group
group:
Indicates group of parameters to report, as follows:
AUD
- Audio service diagnos.
AW
- Alarm/Warning status
CA
- Conditional Access diagnostics
DPI
- Conditional Digital Program Insertion (DPI)
GL
- Genlock system (if installed and applicable)
LAN
- IP/Ethernet diagnostics
NTW
- COMPEL
network control diagnostics
PRGMP
- Program mapping at ASI output
MSC
- Miscellaneous diagnostics
REC
- Automated Recovery status
RF
- Carrier Acquisition/Tracking diagnostics
RPA
- Return Path diagnostics
SW
- Software download/self-test status
TS
- Transport Stream diagnostics
VID
- Video service diagnostics
Expanded report on unit NV operating parameters. A Local Control Command (available from the terminal
regardless of "Local Control Enable/Disable" commands from the network).
RESET
Resets unit. A Local Control Command (available from the terminal regardless of "Local Control Enable/
Disable" commands from the network).
RPATH
Command to display all return path non-volatile settings. A Local Control Command (available from the
terminal regardless of "Local Control Enable/Disable" commands from the network). A Local Control
Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the
network).
RPATH FROM domain
domain:
Legal string of keyboard characters in proper domain-name format (e.g.,
string1.string2.string3…)
Domain name portion of “from” email address in Return Path reporting. A Local Control Command
(available from the terminal regardless of "Local Control Enable/Disable" commands from the network).
RPATH RELAY addr
addr:
IP address formatted as
n1:n2:n3:n4
where n
n1
,
n2
,
n3
, and
n4
are integers between
0
and
255
.
IP address of local Mail Relay server, if any. A Local Control Command (available from the terminal
regardless of "Local Control Enable/Disable" commands from the network).
RPATH SEND
Command ordering IRD to immediately send a Return Path report. A Local Control Command (available
from the terminal regardless of "Local Control Enable/Disable" commands from the network).
Table 3.3: Command Directory for U4600 Terminal Commands