Windows Marketplace V.90 - Manual (Page 15)

15
Step 7 After the installation utility has finished installing the drivers, restart your
computer to enable the drivers.
Step 8 Click on the Modems icon in the Control Panel. Verify that Windows
NT has correctly found the modem.
Step 9 If you wish to use your modem to dial into a Windows NT Remote Ac-
cess Server or wish to connect to the Internet, you will need to configure
Dial-up Networking. Go to: Start-Settings-Control Panel and double-
click the Network icon. Click on the Services folder and select Remote
Access Service. If the Remote Access Service option is not listed (if
present, go to Step 10), click on the Add button. Scroll-down the menu
and select Remote Access Service. Click on the OK button. Windows