Windows Marketplace V.90 - Manual (Page 14)

14
CONFIGURING WINDOWS NT 4.00
In order to install the modem in Windows NT, you must prepare the installation
utility supplied on a separate floppy diskette. This diskette should be labeled Win-
dows NT Installation Utility. This program will allow for easy installation and
uninstallation of your PCI Windows Modem.
Step 1 Install your modem into an available PCI slot (see the Do This First
section for important preinstallation information).
Step 2 Insert your modem’s Windows NT installation diskette into your
computer’s Floppy Disk Drive.
Step 3 Copy the self-extracting installation file into a temporary directory on
your computer’s default Hard Drive.
Step 4 Go to: Start-Programs and select Windows Explorer. Go to the tem-
porary directory where you stored the self-extracting installation file and
double-click on the pm504.exe file. After the file self-extracts, double-
click the setup.exe file.
Step 5 The installation utility will show a welcome panel. Read the warning
notice and close any open programs before beginning the installation.
Click Next>.
Step 6 The next step in the installation process offers an install or remove op-
tion. Select Install new modem drivers and components. Click Next>.