Wegener Communications IPUMP 562 - Manual (Page 44)

Operation
34 800092-01 Rev. A www.wegener.com
Elapsed Times screen
Use following steps to display the Elapsed Times screen on the OSD menu:
1. Navigate to the Signal Quality screen. See Signal Quality screen on page 32
OR from a Signal Quality sub-screen, press the left arrow button to go back to the
Signal Quality screen.
2. Press the down arrow button to select Elapsed Times .
3. Press Enter .
4. View the details as shown in Figure 3.26 .
Figure 3.26: iPump 562 OSD Elapsed Times
Query Network History
Use following steps to display the Network History screen on the OSD menu:
1. Navigate to the Unit Status screen, see Unit Status screen on page 31.
2. Press the down arrow button to select Network History .
3. Press Enter .
4. View the details as shown in Figure 3.27 .