Wegener Communications IPUMP 562 - Manual (Page 42)

Operation
32 800092-01 Rev. A www.wegener.com
Figure 3.22: iPump 562 OSD Unit Status
Signal Quality screen
Use following steps to display the Signal Quality screen on the OSD menu:
1. Navigate to the Unit Status screen, see Unit Status screen on page 31.
2. Press the down arrow button to select Signal Quality Status .
3. View the details as shown in Figure 3.23 .
Figure 3.23: iPump 562 OSD Signal Quality Status
Current Quality screen
Use following steps to display the Current Quality screen on the OSD menu:
1. Navigate to the Signal Quality screen, see Signal Quality screen on page 32.