Wegener Communications IPUMP 562 - Manual (Page 41)

www.wegener.com 800092-01 Rev. A 31
Unity 552 User’s Manual
backup. Use the Version Information screen to find out about the software versions
installed in the system.
Figure 3.21: iPump 562 OSD Application Switch
Monitor
Status
Information The following types of status information are available for viewing:
Signal Quality
Current Quality
History This Setting
Elapsed Times
Unit Status screen
Use following steps to display the Unit Status screen on the OSD menu:
1. Press any push-button on the front-panel to display the Main Menu .
2. Press the down arrow button to select Advanced Setup .
3. Press Enter .
4. Press the down arrow button to select Unit Status .
5. Press Enter .
6. View the details as shown in Figure 3.22 .
Note: When the unit is locked to a carrier and playing video/audio, the Current Operation
is Normal and Service Status is OK.
If carrier is not locked, Service Status can be Acquiring Transport .