Wegener Communications IPUMP 562 - Manual (Page 29)

www.wegener.com 800092-01 Rev. A 19
Unity 552 User’s Manual
Figure 3.6: iPump 562 OSD LNB Setup Screen
Use the LNB Setup screen to set and display the LNB configuration.
Table 3.4: LNB configuration options
Monitor
Signal
Quality Signal Quality Setup screen
Use following steps to display Signal Quality Setup screen on the OSD menu:
1. Press any push-button on the front-panel to display the Main Menu .
2. Press the down arrow button to select Carrier Settings .
3. Press Enter .
4. Press the down arrow button to select Signal Quality Setup .
5. Press Enter to display the Signal Quality Setup screen shown in Figure 3.7 .
Option Possible values Comments
LNB Type Local Oscillator or Universal/ASTRA Only Local Osc option allows
other options to be set.
LO Type Custom Freq., Std C-band, US Ku-
band, Euro Low Ku-band or Euro Hi
Ku-band Only Custom Freq. option
allows other options to be set.
LO Custom Freq.