Wegener Communications 4422 - Manual (Page 22)

Page 22
UTY4422-002 Page 22 of 72
2.5 EXTERNAL INPUTS AND OUTPUTS
Table 8. Input and Output Connectors
Name Description
RF IN There is no connector on this model. The hole is capped.
VIDEO OUT 75 ohm female BNC, NTSC composite video output
BALANCED AUDIO CH1 L & R Female 9 pin D Connector
BALANCED AUDIO CH2 L & R Female 9 pin D Connector
SDI (D1) VIDEO
Female BNC
AES/EBU Female 9 pin D Connector
SERIAL 1 Female 9 pin D Connector (Printer, Modem or Terminal).
See
Table 9 (Page 23) for pin-outs.
SERIAL 2 Female 9 pin D Connector (Printer, Modem or Terminal).
See
Table 9 (Page 23) for pin-outs.
LNB (J27 required) Plug-in terminal strip, LNB DC
GND Plug-in terminal strip, LNB DC current return
ALARM Plug-in terminal strip, alarm relay contacts
CLOSURE 1 Plug-in terminal strip, network-controlled solid-state relay
contacts
CLOSURE 2 Plug-in terminal strip, network-controlled solid-state relay
contacts
AC Input AC power connected through a standard IEC connector