Wegener Communications 4422 - Manual (Page 13)

Page 13
Page 13 of 72 UTY4422-002
1.7 PHYSICAL SPECIFICATIONS
The operating temperature of the unit is +10°C to +40°C in still air with unblocked side vents.
(The unit is fan-cooled.)
Table 1. Physical Specifications
Parameter Description
Size 19”W x 1.75”H x 13.75”D
48.26 Cm W x 4.8 Cm H x 34.9 Cm D
Weight 10.5 Pounds (4.8 kg)
Operating Temperature +10°C to +40°C
+50°F to +104°F
Power Requirements 115VAC, 60Hz, 0.8A Typ., or
230VAC, 50Hz, 0.5A Typ.
1.8 TECHNICAL SUPPORT
In the event the unit fails to perform as described, contact Wegener Communications Customer
Service at (770) 814-4057, FAX (678) 624-0294, or e-mail “[email protected]”.
To return a product for service:
1. Obtain a Return Material Authorization (RMA) number by completing and faxing a copy of
the RMA Form (See
Appendix D (Page 65) to (678) 624-0294. You may e-mail the same
information instead to:
[email protected]
2. Plainly write the RMA number on the OUTSIDE of the product-shipping container.
NOTE: Writing the RMA number on the outside of the shipping container will
help us to return your equipment to you sooner. Thank you.
3. Return the product, freight prepaid, to the address below:
Service Department RMA# ________
Wegener Communications, Inc.
359 Curie Dr.
Alpharetta, GA 30005
NOTE: All returned material must be shipped freight prepaid.
C.O.D. shipments will not be accepted.
Please contact Customer Service at one of the numbers above if you have any questions
regarding service procedures.