VIEWSONIC PJ700 - Manual (Page 25)

22 ViewSonic PJ700
E
N
G
L
I
S
H
Attaching the Optional Handle
The ViewSonic PJ700 comes with an attachable handle. Follow the steps below to attach the handle.
The handle hooks are on the left side of the projector,
as shown in the figure to the left. If you choose to use
the attachable handle, follow the steps below
carefully.
Caution: Never lift the projector by the handle
without first ensuring that the handle is attached and
fastened. Doing so can cause injury or damage to the
projector
Figure 9: Attaching the Handle
To attach the handle:
1 Lift one handle hook on the side of the projector.
2 Pass one end of the handle through the handle
hook.
3 Buckle the end of the handle as shown.
4 Repeat steps 1 through 3 to attach the other end of
the handle.
Handle hooks