VIEWSONIC PJ700 - Manual (Page 21)

18 ViewSonic PJ700
E
N
G
L
I
S
H
Power Indicator Lights
If the Lamp or Temperature indicator is red or flashing red when the ViewSonic PJ700 is turned on,
there is a problem and you should not proceed. Turn off the projector and let it cool down.
Table 3: Power Indicator Lights
Power
Indicator
Lamp
Indicator
Temperature
Indicator
Condition
ORANGE
(steady) OFF OFF Standby status–indicates that the power is on.
GREEN
(flashing) OFF OFF The ViewSonic PJ700 is in warm-up mode.
GREEN
(steady) OFF OFF Ready for normal operation.
ORANGE
(flashing) OFF OFF The ViewSonic PJ700 is in cool-down mode.
RED RED OFF Lamp does not light–lamp failure not related to
temperature.
RED RED
(flashing) OFF The lamp is not secure or the lamp cover is not
closed. Firmly reinsert the lamp and secure the lamp
cover.
RED OFF RED (flashing) The cooling fan is not operating–the ViewSonic
PJ700 requires service.
RED OFF RED Internal overheating–the ViewSonic PJ700 should
turn off automatically or you should turn-off the
unit. Allow the unit to cool down for 20 minutes.
Make sure the air-filter is clean and the air vents are
clear before preceding.