VIEWSONIC PJ700 - Manual (Page 10)

ViewSonic PJ700 7
E
N
G
L
I
S
H
Adjusting the Projector Angle
Adjust the projector angle using the foot adjusters shown in Figure 5 below. See also Keystone under
“Image Menu” on page 11.
1 Press the release button to lower the front foot, then tilt the projector up as shown in Figure 5
below.
• The front foot adjusts the vertical height of the projected image.
2 Release the button to lock the front foot in place.
3 Rotate the rear foot adjuster to align the image.
• The rear foot adjusts the horizontal alignment of the projected image.
Figure 5: Angle Adjustment
Rotate the rear
foot adjuster Press the release button
to lower the front foot adjuster Front foot adjuster