VBrick Systems 7000 - Manual (Page 48)

42 © 2009 VBrick Systems, Inc.
The Advanced Settings are used to define common session announcement information for
all streams (destinations) associated with a program.
Figure 6. Programs: Part 2 – Advanced Settings
Program Name Lets you define a descriptive name for the program which is
added to the announcement. This announcement text is displayed
in the Program Guide for other VBrick products. Default =
\H
Program x . Both Program Name and Session Information allow
special character strings to be inserted automatically into these
fields.
\H or \h – Host Name of VBrick appliance. When the default
entry is used, the program is identified by the default VBrick
Host Name.
Number of Transmitters 0 – 25. Default = 1.
Number of Servers 0 – 3. Default = 1.
Max RTP Packet Size 248 – 8000. Default = 1452. Note: When streaming to Quicktime
players, a Max RTP Packet Size less than 1000 may cause audio
dropouts.
Shutdown on Video
Input Problem If enabled, this parameter stops streaming when a video input
problem is detected. Default = Disabled.
Author A string in the announcement that can be used to identify the author.
This string is shown in StreamPlayer. Default = "My Author."