VBrick Systems 7000 - Manual (Page 45)

VBrick H.264 Appliance Admin Guide 39
Chapter 4
Program Configuration
A program is a way to group a video and/or audio source that is encoded and streamed over
the network. A program represents a video and/or associated audio source. This software release
supports one program. As explained on the following pages, the appliance supports two
types of program transmission: transmitter mode and server mode.
• Transmitter Mode – In transmitter mode a transmitter pushes the stream to multiple
destinations. It is a constant push and there is no client "request" for the stream.
• Server Mode – In server mode, a served program does not become active on the network
until requested by a decoder client like StreamPlayer or QuickTime.
Topics in this section
Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Global
The Global page is used to configure global parameters which apply to all programs. These
settings are usually determined by the network configuration.