VBrick Systems 7000 - Manual (Page 41)

Video/Audio Configuration
VBrick H.264 Appliance Admin Guide 35
‘
Note In this initial release of the H.264 appliance there is one video source and one audio
source. The audio source can be one of the audio jacks or both jacks. Also note that
there is one program consisting of the audio source and/or the video source.
How is Audio
Connected? The audio is connected using the input jacks (labeled
Main
and
Aux
) on
the rear of the unit. Select one of the following depending on the
electrical cable configuration of the input.
• Balanced – typically used with professional audio equipment.
• Unbalanced – typically used with consumer devices, e.g. VCRs.
• Unbalanced on Separate Jacks – typically used with consumer
devices that support two-jack stereo. In this mode, connect the
right stereo channel to the
Aux
connector.