VBrick Systems 7000 - Manual (Page 37)

VBrick H.264 Appliance Admin Guide 31
Chapter 3
Video/Audio Configuration
Topics in this section
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Video
Note In this initial release of the H.264 appliance there is one video source and one audio
source. The audio source can be one of the audio jacks or both jacks. Also note that
there is one program consisting of the audio source and/or the video source.
How is Video
connected?
• SVID – four pin connector.
• Composite – one pin connector.
In most cases S-Video produces higher quality input and
correspondingly better compressed output. If you have a choice, S-
Video is recommended.
Video Format • NTSC – Default. North America and Japan.
• PAL – Europe, Asia, Australia.