Verizon DMS 100 User Manual

Page 22

Enter your Verizon-provided temporary PIN, then press

. If this

is the first time you’ve used Enhanced Call Forwarding, you’ll be
prompted to create your new 6- to 10-digit PIN.

Refer to your Enhanced Call Forwarding User Guide for
detailed information on how to use this feature.

Executive Busy Override

Executive Busy Override allows you to gain access to a busy line
within your CustoPAK system by dialing a code, thus establishing a
three-way call. The called number will receive a warning tone prior
to the establishment of the three-way conference call. The person to
whom the called party is speaking can be either inside or outside of
the CustoPAK system. This feature is not available in the GTD-5
switch type.

Upon reaching a busy internal station:

Press the switchhook (or the Tap/Flash/Recall/Link button,
depending on your telephone set).

Press

(both parties will hear break-in tone and you

can now join the conversation).

NOTES:

1.) If a three-way conference is already in progress on the called

number, the feature will not operate.

2.) If the called party presses the switchhook (or the

Tap/Flash/Recall/Link button, depending on the telephone set),
the overriding party will be disconnected from the three-way
call. If any of the three parties hang up, the remaining two
parties will still be connected.

5.) Caller ID – Number Only is not available with Off Premises

station lines or Foreign Exchange station lines.

6.) Verizon must automatically activate this feature. You cannot

activate or deactivate the feature as you choose.

Enhanced Call Forwarding

Using a toll free 800 number, you can forward calls from anywhere in
the country to any other number of your choice (pager, cellular
phone, work phone or home phone). Enhanced Call Forwarding has
been installed with a default destination number that you have cho-
sen, and provides you with the flexibility to override the default num-
ber whenever necessary. This feature is not available in the DMS
10 switch type.

While using Enhanced Call Forwarding, certain buttons always have
the same standard function:

Press

to jump to the Main Menu.

Press

to hear a menu again.

Press

to hear help information.

Press

to return to the previous menu.

If you’re entering a string of digits (a phone number or a time)
and make a mistake, press

to clear the entry so you can

start over again.

After entering a string of digits, press

to end the string.

Calling Enhanced Call Forwarding

From a touch-tone telephone:

Dial 1-888-483-3230.

Enter your 10-digit Enhanced Call Forwarding account number,
then press

This manual is related to the following products:

DMS 10