Verizon DMS 100 - Manual (Page 12)

21
NOTES:
1.) Calls forwarded outside the system are subject to local, regional
toll or long distance charges, as applicable.
2.) To confirm that Call Forwarding is on, press and if
the feature is on you will hear a fast busy tone. If it is off you’ll
hear normal dial tone.
3.) You can place calls when Call Forwarding is on, however, you
cannot answer incoming calls. You will hear one short ring each
time a call forwards to remind you that the service is on.
4.) Call Forwarding overrides Call Waiting, Dial Call Waiting, Hunting
arrangements and Call Forwarding – Busy Line/Don’t Answer.
5.) Voice Mail service will not work when Call Forwarding is on,
unless you have activated forwarding to the Voice Mail service
access number.
6.) A line with Call Forwarding activated cannot have an Automatic
Callback request initiated against it.
20
Call Forwarding
This Call Forwarding option allows you to have all incoming calls
forwarded to a pre-determined telephone number either inside or
outside the CustoPAK system. Call Forwarding provides you with the
flexibility to choose your own forward-to number, to change it as
often as you like and to turn the feature on or off as needed. When
activated, it overrides Call Forwarding – Busy Line/Don’t Answer and
gives you the mobility you need to be productive outside the office
and after hours.
To turn Call Forwarding on:
Ī
Lift the handset and listen for dial tone.
Ī
Press .
Ī
At the tone, dial the telephone number you want your calls
forwarded to.
Ī
When the call is answered, the feature has been activated. If
the call is not answered, hang up and repeat the above steps
within two minutes. The feature is activated when you hear the
confirmation tone.
To turn Call Forwarding off:
Ī
Press (two short tones indicate that the service has
been turned off).