Verizon DMS 100 - Manual (Page 18)

33
Busy Redial
After reaching a busy line within your regional calling area, this
convenient service allows you to dial a code that will automatically
connect you when both lines are idle. Once activated, Busy Redial
will monitor the busy line and attempt to connect your call for up
to 30 minutes, unless canceled. You will be alerted with a special ring
when the call is returned. You can use Busy Redial to help reduce
multiple callbacks, dialing time and lost productivity. This feature is
not available in the DMS 10 switch type.
After dialing a busy number:
Ī
Hang up.
Ī
Lift the handset and listen for dial tone.
Ī
Press . You will hear two normal ringing tones or an
announcement. If the called number is still busy, a voice record-
ing will tell you that your call is next in line.
Ī
Hang up. When the number you called is no longer busy, your
telephone will ring with a series of short-short-long rings (ringing
tones may vary).
Ī
Lift the handset. You will hear normal ringing tone.
To deactivate Busy Redial:
Ī
Lift the handset and listen for dial tone.
Ī
Press .
NOTES:
1.) The number you called will not ring until you pick up
your telephone.
2.) Occasionally, the person you are calling uses the phone before
Busy Redial can complete your call. If this happens, a voice
recording will tell you to hang up and reactivate Busy Redial.
3.) You can use Busy Redial to return calls to more than one busy
number at a time.
32
* 69
This convenient feature automatically stores and allows you to redial
the number of the last person who called you.
* 69 only works on
calls made from numbers within your regional calling area and can
be used whether you answered the last call or not. If you return the
call and the number is busy,
* 69 will monitor the busy line and
attempt to connect your call for up to 30 minutes, unless canceled.
In most cases, your phone will ring with a series of short-short-long
rings when the number you called is no longer busy. This feature
is not available in the DMS 10 switch type.
To activate * 69:
Ī
Lift the handset and listen for dial tone.
Ī
Press (a voice recording may provide additional
instructions).
To deactivate * 69:
Ī
Lift the handset and listen for dial tone.
Ī
Press .
NOTES:
1.) If you hear the Call Waiting tone while you are on the line, you
have two choices: you can use * 69 to call back later, or you
can use Call Waiting during the call.
2.) A * 69 callback will not activate a Call Waiting tone; the line
must be idle.
3.) * 69 and Automatic Callback cannot be on the same line.
4.) This feature must be applied to all members of a Hunt group.
5.)
* 69 ring patterns may duplicate those of Distinctive Ringing.
6.) * 69 will not work when activated against a line with
Call Forwarding.