Visioneer XP 100 - Manual (Page 30)

S TEP 2: C ONNECT THE S CANNER 23
C
ONNECT THE
S
TROBE
XP 300 S
CANNER
1. Using the on-screen window as your guide, plug the AC adaptor
cable into the power jack on scanner, and then plug the AC adapter
into an electrical outlet.
2. Plug the USB cable into the USB port on your scanner and then
plug the other end into any USB port on your computer.
Connection to a USB 2.0 High Speed port provides optimum
performance, but your scanner can also connect to a USB 1.1 port.
The USB symbol identifies the location of the USB port on your
computer. If the plug does not attach easily, make sure that you are
plugging it in correctly. Do not force the plug into the connection.
Your computer recognizes that a scanner has been plugged into the
USB port and automatically configures its driver database with the
appropriate software to run the scanner.
3. Proceed to “Step 3: Calibrate the Scanner” on page 24.
Note: You can also connect the scanner to a USB hub if the hub has
its own power supply plugged into an electrical outlet.