VIEWSONIC PJ750 - Manual (Page 9)

ViewSonic PJ750 7
Cabling
Refer to the table below for connecting each terminal of the projector to each device.
Table 2: Cabling
CAUTION
• An incorrect connection may result in fire or electric shock. Be sure to read this manual before
connecting the projector.
• Be sure to turn off all devices to be connected before you connect the projector.
• The cables may have to be connected with their core set to the projector’s side. Only connect the
cable supplied with the projector or those specified.
NOTE:
• Before you connect the projector, be sure to read the manual of the respective device to be
connected. Make sure the projector is compatible with the devices.
• Secure the screws of the connectors and tighten them.
• The optional Mac adapter may be necessary for certain RGB input modes.
• Certain computers may be provided with multiple display modes. The use of such modes may not
be possible with this projector.
Function Terminal Cable
Analog RGB input
RGB IN 1
Accessory or optional RGB cable with D-
sub 15-pin shrink jack and inch thread
screws.
RGB IN 2
Analog RGB output RGB OUT
Audio input
(from the computer)
AUDIO IN [RGB 1]
(interlocked with RGB IN 1)
Optional audio cable with stereo mini-jack
AUDIO IN [RGB 2]
(interlocked with RGB IN 2)
PS/2 mouse control
CONTROL
Accessory PS/2 mouse cable
ADB mouse control Optional ADB mouse cable
Serial mouse control Optional serial mouse cable
RS/232C communication Optional RS-232C mouse cable
USB mouse control USB Optional USB cable
S-video input S-VIDEO
Optional S-video cable with mini DIN 4-pin
jack
Video input VIDEO Optional video/audio cable
Component video input
COMPONENT VIDEO Y
Accessory component video cable COMPONENT VIDEO C
B
/P
B
COMPONENT VIDEO C
R
/P
R
Audio input
(from video equipment)
AUDIO IN L
Optional video/audio cable or optional
audio cable with RCA jack AUDIO IN R
Audio output AUDIO OUT Optional audio cable with stereo mini-jack