VIEWSONIC PJ750 - Manual (Page 16)

14 ViewSonic PJ750
Image Menu
The following adjustments and settings are available when IMAGE is
selected on the menu. Select an item with the and buttons, and start or
stop operation with the and buttons.
Table 6: Image Menu
Item Description
BLANK
Select Blank Screen Color: Select color with the button.
• The image is cleared and the entire screen is displayed in the selected color,
when BLANK mode is set with BLANK ON, or when there is no signal for 5
minutes.
MIRROR Select Mirror Status: Select mirror status with button.
START UP
Setup Initial Screen Display: Select TURN ON with the button.
Clear initial Screen Display: Select TURN OFF with the button.
• Note that if TURN OFF is selected the blank screen is displayed in blue when
there is no signal.
GAMMA
Select Gamma Mode: Select the gamma mode with the button.
NORMAL CINEMA DYNAMIC
COLOR TEMP
Select Color Temperature:
Select the color temperature mode with the button.
NORMAL Low