VIEWSONIC PJ750 - Manual (Page 14)

12 ViewSonic PJ750
Setup Menu
The following adjustments and settings are possible when SETUP is selected at the top of the menu.
Part of the Setup menu differs between RGB input and video input. Select an item with the and
buttons, and start operation. Use the Single menu to reduce menu size (see Table 3, MENU
SELECT).
Table 4: Setup Menu
Item Description RGB
COMPONENT
480i
575i
480P
720P
1080i
BRIGHT Adjustment: Dark Light √ √ √
CONTRAST Adjustment: Weak Strong √ √ √
V POSIT Adjustment: Down Up √ − −
H POSIT Adjustment: Left Right √ − −
H PHASE
Adjustment: Left Right
• Adjust to eliminate flicker.
√ √ √
H SIZE
Adjustment: Small Large
• The image may not be displayed correctly if the
horizontal size is excessive. In such cases, press the
RESET button, and initialize the horizontal size.
√ − −
SHARPNESS Adjustment: Soft Clear − − −
COLOR Adjustment: Light Dark − √ √
TINT
Adjustment: Red Green
• Valid only when NTSC or NTSC 4.43 signal is detected.
− − −
COLOR BAL R Adjustment: Light Dark √ √ √
COLOR BAL B Adjustment: Light Dark
√ √ √
ASPECT
Select Image Aspect Ratio:
Select position of image:
Press the button when 16:9 [ ] has been selected.
Center
→
Down
→
Up (
→
Center )
√ − √
Select Image Aspect Ratio:
small[ ]
Select position of image:
Press the button when 16:9 [ ] / 4:3 small [ ] has
been selected.
Center
→
Down
→
Up (
→
Center )
• 4:3 small cannot be selected with the input of 720P or
1080i component.
• 4:3 small may not be displayed correctly with some
input signals.
− √ −
COMPONENT VIDEO/S-VIDEO RGB