UNICOM Electric SmartGST-2402M User Manual

Page 75

Text mode
Original mode

www.unicomlink.com

UNICOM

5-4-13-2. TFTP Backup Configuration

Use this page to set TFTP server IP address. You can save the current EEPROM value
here and then go to the TFTP restore configuration page to restore the EEPROM value.

5-4-14. Factory Default

Reset Switch to default configuration.

Default IP address: 192.168.16.1
Default Gateway: 192.168.16.254
Subnet mask: 255.255.255.0
The other setting value is either Disable or None.

5-4-15. Reboot

Reboot the Switch in software reset.