UNICOM Electric SmartGST-2402M - Manual (Page 49)

www.unicomlink.com UNICOM
48
5-1. Web Management Overview
5-2. Port status
This page displays all port status.
1. State: Displays port status, disable or enable. Unlink will be treated as disabled.
2. Link Status: Down is “No Link”, UP is “Link”.
3. Auto Negotiation: Displays the auto negotiation mode: Auto-Force or Nway-force.
4. Speed status: Displays 1000Mbps, 100Mbps, or 10Mbps speed. Ports 1 - 24 are
10/100Mbps and Ports 25 - 26 are 10/100/1000Mbps.
5. Duplex status: Displays full-duplex or half-duplex mode.
6. Flow Control: Full: Displays flow control status as enabled or disabled in full mode.
Half: Displays backpressure as enabled or disabled in half mode.
7. Rate Control: Displays the rate control setting.
Ingr: Displays the effective port ingress rate of the user setting.
Egr: Displays the effective port egress rate of the user setting.
8. Priority: Displays whether port static priority status is High, Low, or disabled.
9. Port Security: Displays whether port security is enable or disabled.