UNICOM Electric SmartGST-2402M - Manual (Page 41)

www.unicomlink.com UNICOM
40
4-4-5-1. System Configuration
When enabling the IEEE 802.1X function, all parameters can be configured.
1. Radius Server IP: Set the Radius Server IP address.
2. Shared Key: Set an encryption key to use during authentication sessions with the
specified radius server. This key must match the encryption key used on the Radius
Server.
3. NAS Identifier: Set the identifier for the radius client.
4. Server Port: Set the UDP destination port for authentication requests to the
specified Radius Server.
5. Accounting Port: Set the UDP destination port for accounting requests to the
specified Radius Server.