UNICOM Electric SmartGST-2402M - Manual (Page 20)

UNICOM SmartGST-2402M
19
: Configure all items. When finished with configuration press ESC to go back to
action menu line.
: Save all configured values. Before you leave this session, please execute
this command or you will lose all changes.
4-3-4. Port Mirroring Configuration
Port Mirroring is a method of monitoring traffic in switched networks. Traffic through
ports can be monitored by one specific port. All traffic going in or out of monitored ports
will be duplicated into monitoring port.
Press the Space key to change configuration of each item.
Mirroring state: Mirror mode for TX packet only, RX packet only, or both packets.
Analysis port: Set the destination port of the mirroring packet. All of the packets of
mirroring port will be duplicated and sent to Analysis port. Use the SPACE key to select.
Actions->
: Exit the port configuration page and return to previous menu.
: Configure all items. When finished with configuration press ESC to go back to
the action menu line.
: Save all configured values. Before you leave this session, please execute
this command or you will lose all changes.
: Return to previous page.
: Go to next page.