UNICOM Electric SmartGST-2402M - Manual (Page 72)

UNICOM SmartGST-2402M
71
5-4-12. 802.1X
When enabling the IEEE 802.1X function, you can configure the parameters of this
function.
5-4-12-1. System Configuration
1. Radius Server IP: Sets the Radius Server IP address.
2. Server Port: Sets the UDP destination port for authentication requests to the
specified Radius Server.
3. Accounting Port: Sets the UDP destination port for accounting requests to the
specified Radius Server.
4. Shared Key: Set an encryption key for use during authentication sessions with the
specified radius server. This key must match the encryption key used on the Radius
Server.
5. NAS Identifier: Set the identifier for the radius client.