Uniden D2998-6 - Manual (Page 4)

4 - English
Connect the Power and Telephone Cords
1. ConnectthebaseACadaptertothepowerjackandthetelephonecordto
the TEL LINE jack.Routethecordsasshownbelow:
For desktop use For wall mount use
2. PlugtheACadapterintoastandard120VACpoweroutlet,andconnect
thetelephonecordtoastandardtelephonewalljack.
3. Ifyouaremountingthephoneonthewall,placethemountingslotsoverthe
pinsonthewallplate,andslidethebasedowntolockitintoplace.
Test the Connection
Pickupthecordedhandsetfromthebase.Youshouldhearadialtoneandthe
displayonthebaseshouldsay Talk .Whenyougetadialtone,makeaquick
testcall.
If... Try...
the display says Check Tel Line or you
don't hear a dial tone
checking the connection between the base
and the phone jack.
you keep hearing a dial tone changing to pulse dialing.
Changing from Tone to Pulse Dialing
Yourphoneusestonedialingbydefault.Ifyourphonecompanyusespulse
dialing,youneedtochangeyourphone’sdialmode.
1. Press
select/menuandselect Global Setup (seep.10forusingthemenus).
2. Select Dial mode ,then Pulse .You'llhearaconfirmationtone.
TosendDTMFtonesduringacall(e.g.,foranautomatedresponsesystem),
press totemporarilyswitchtotonedialing.Whenyouhangup,thephone
automaticallyreturnstopulsedialing.