Uniden D2998-6 - Manual (Page 18)

18 - English
USING THE ANSWERING SYSTEM
Answering System Options ( Ans. Setup )
Youcanchangetheansweringsystemoptionsfromanystation.Justopenthe
menuandselect Ans. Setup .
Menu Option What it does
Record Greeting (Base only) Record an outgoing message (see p. 19)
Greeting Options (Base only) Switch greetings or delete your greeting (see p. 19).
Security Code
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see p. 21).
Ring Time
Set the number of rings ( 2 , 4 , or 6 ) before the system answers
(see p. 21 about Toll Saver ).
Record Time
Set the amount of time ( 1 or 4 minutes) callers can leave a
message. Choose Announce Only if you don't want the system
to let callers leave a message.
Message Alert
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any key on the base.
Ans. Language Change the language of the system's voice prompts.
Call Screen
Turn on the call screen feature so you can hear callers as they
leave messages on the base speaker (see p. 20).
Ans. On/Off
(Handset only) Turn your answering system on or off. (To turn
your system on or off from the base, just press On/Off.)
Accessing the Answering System
Withthephoneinstandby,youcanaccessyoursystemfromthebaseor
remotelyfromanyhandset.
5:Stop
[ / /select]
Press MUTE/MESSAGES to start
remote operation mode.
Press SELECT/MENU to
choose the current option.
Press FLASH/EXIT to stop
remote operation mode.
1:Repeat
2:Play 3:Skip
4:Delete 6:SelectGreeting
8:RecNewGreeting
Use PHONEBOOK to go to
the previous option.
Use CID to go to
the next option.