Uniden D2998-6 - Manual (Page 23)

English - 23
Caller ID problems Possible solutions
Caller ID displays briefly
and then clears.
xYou may have to change the line mode. Contact
Customer Service for instructions.
Caller ID displays, but
I can't hear the CID
announcements.
xMaking sure TTS (Text-To-Speech) is turned on.
xIncreasing the ringer volume so the CID
announcements are louder.
Multi-station problems Possible solutions
I can’t transfer calls. xReset all the stations (see p. 24).
Two handsets can’t talk to a caller. xSee if any station is in Privacy Mode.
A handset says Unavailable .
xMove the handset closer to the base.
xSee if any station is in Privacy Mode.
xReset the handset (see p. 24).
I can’t register a new handset.
xReset the handset (see p. 24).
xSee if you have 6 registered handsets.
Answering system problems Possible solutions
The answering system does
not work.
xMake sure the answering system is on.
xMake sure the base is plugged in.
The system won't record
messages.
xSee if Record Time is set to Announce Only .
xDelete messages (memory may be full).
A handset can't access the
answering system.
xSee if another handset is using the system.
xMake sure the phone is in standby.
My outgoing message is
gone.
xIf there was a power failure, re-record your
personal outgoing message.
I can’t hear the base
speaker.
xMake sure call screening is turned on.
xChange the base speaker volume.
Messages are incomplete.
xIncrease the Record Time .
xDelete messages (memory may be full).
The system keeps recording
when I answer on an
extension.
xYou may have to change the line mode. Contact
Customer Service for instructions.
Installing a Line Filter or DSL Filter
AtelephonelinefilterorDSLfilterpreventsservicesthatusethephoneline
fromcausinginterferenceonyourphone.Togetalinefilter,contactyour
serviceproviderorlookinanelectronicsstore.
Plugthefilterintothetelephonewalljackandplugthebaseintothefilter.
Makeatestcalltomakesurethenoiseisgone.