Uniden D2998-6 - Manual (Page 20)

20 - English
Getting Your Messages
To... From the base From a handset
play
new messages
Press play/stOp. Press mute/messages.
The system announces the number of new and old messages,
then plays each new message (followed by the day and time
if set) in the order it was received.
restart this
message
Wait at least 5 seconds after the message starts playing,
press Repeat. select 1:Repeat .
replay an earlier
messages
Within 2 seconds after a message starts playing,
press Repeat. select 1:Repeat .
skip a message Press skip. Select 3:Skip .
slow down
message playback
Press slOW. Press again to return to
normal playback speed.
Not available.
delete
a message
While the message is playing,
press Delete. select 4:Delete
delete
all messages
With the phone in standby, press
Delete; press Delete again to confirm.
Not available.
play
old messages
After the system plays the new messages,
press play/stOp again. select 2:Play .
stop playback Press play/stOp. Select 5:Stop .
Screening Your Calls
Youcanusetheansweringsystemfor call screening.Whilethesystemtakesa
message,youcanlistenonthebasespeaker(ifyouturnon Call Screen )orfrom
ahandset.Onlyonehandsetcanscreencallsatatime.Ifanotherhandsettries
toscreenthecall,itbeepsandreturnstostandby.
To... From the base From a cordless handset
hear the caller leaving
a message
Just listen to the caller over
the speaker.
Press mute/messages.
answer the call Pick up the corded handset. Press talk/enD.
mute the call screen
without answering
Press cleaR/mute.
Press flash/exit or return
the handset to the cradle.
  Ifyoumutethecallscreen,thesystemcontinuestakingthemessage:itjust
stopsplayingthroughthespeaker.