Uniden D2998-6 - Manual (Page 12)

12 - English
USING YOUR PHONE
To...
From the base From a cordless handset
Corded Handset Speaker Earpiece Speaker
make a call, dial
the number, then Pick up the handset.
Press
talk/enD. Press
talk/enD. Press
speakeR.
answer a call Pick up the handset. Press
talk/enD.
Press
talk/enD. Press
speakeR.
hang up
Place the handset
in the cradle.
Press
talk/enD. Press talk/enD or place the
handset in the cradle.
ignore the call
(mute the ringer)
Press cleaR/mute
while the phone is ringing.
Press mute/messages
while the phone is ringing.
switch to/from
the speaker
Press talk/enD.
Pick up the
handset.
Press speakeR.
mute the
microphone
Press cleaR/mute. Press mute/messages.
Press again to turn the microphone back on.
put a call on hold Press inteRcOm/hOlD. * Press cleaR/inteRcOm. *
return to a call on
hold
Pick up the handset
or press talk/enD.
Press
talk/enD.
Press
talk/enD.
Press
speakeR.
* After 5 minutes on hold, the call will be disconnected.
Changing the Volume
Youcanadjusteachstation'svolumeindependently.Press uporDOWn to
increaseordecreasetheearpieceorspeakervolumewhenyouareonacall.
Youcanadjusttheringervolumeonlywhenthephoneisinstandby.Turning
theringervolumeallthewaydownturnsofftheringer.
# If you want to change the volume of Caller ID announcements, change
the ringer volume.
Using Caller ID and Call Waiting
CallerID(CID)isaserviceavailablefromyourtelephoneproviderthatshows
thephonenumber(andsometimesthecaller’sname)ofincomingcalls;ifyou
turnedonText-To-Speech,italsoannouncesthename.Contactyourtelephone
providerformoreinformation.
Caller ID list Redial list
xThe phone saves the information for the last 30 received
calls to the CID list. An asterisk ( * ) marks any calls received
since the last time you checked the list.
xIn standby, all stations show how many calls came in since
the last time you checked the CID list.
xEach station
remembers the
last 5 numbers
you dialed on it.