Uniden UBC785XLT - Manual (Page 43)

Air Service Search
Using Aircraft Service Search
You can search the aircraft frequencies by pressing AIR. If the scanner stops on an
frequency, you can resume searching by pressing RSM.
Note: When you rotate the VFO while the Air Service Search is active, you can change the
search direction to up or down.
Air Service Search Skip
You can set the scanner to skip the unwanted frequencies during Air Service Search. 100
skipped frequencies are programmable.
1. To skip over a frequency, press L/O when stopping at the frequency you want to skip.
2. To cancel a skip during search, press
▲/HOLD or LIMIT /▼, select the desired
frequency by rotating the VFO or using
▲ or ▼, then press L/O.
To restore all skipped frequencies, press and hold L/O for
2 seconds.
Changing the step
You can choice the step of Aircraft Service Search between 12.5 kHz or 8.33 kHz.
To change the step:
1. Press [MENU].
2. Select 1:SERCH OPTION / 1:AIR STEP by rotating the VFO and pressing E.
3. Select 12.5kHz or 8.33kHz, then press E.
39
SRVC 12.5k
118.0250 AM
SERVICE SEARCH
AIR
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 39