Uniden UBC785XLT - Manual (Page 27)

1. CSQ - The default setting is CSQ (carrier squelch). In this mode the scanner will
stop on any transmission on a programmed frequency.
2. TONE SQ - In Tone Squelch mode, if you have set a subaudible tone for a
frequency, the scanner will only stop on that frequency if the transmission
includes the prescribed tone.
3. TONE SEARCH - In this mode, as soon as the scanner stops on any channel,
the scanner will begin to search for any subaudible tone that is being used on a
transmitted frequency. The scanner will check each CTCSS tone sequentially
and it will find DCS tones instantly.
9:BANK TAG
Allows you to set an alphanumeric text tag for individual banks in the scanner (1-10).
(The "0" key represents Bank number 10.) For example, you may wish to set the
Bank one text tag as Law Enforcement, the second bank as Fire, etc.
23
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 23