Uniden UBC785XLT - Manual (Page 14)

Feature Highlights
• 1000 Channels – Program one frequency into each channel. You must have at least one
channel programmed to use the Scan mode.
• 22 Bands – Includes 22 bands, with aircraft and 800 MHz.
• 25 MHz-1300 MHz – Indicates the range of frequencies that can be searched within the
bands of your scanner.
Note: The frequency coverage is not continuous and excludes 512-806 MHz and
960-1240 MHz.
• 10 Priority Channels – You can assign one priority channel in each bank. Assigning a
priority channel allows you to keep track of activity on your most important channel(s)
while monitoring other channels for transmissions.
• Priority Plus Scan – Allows you to scan only priority channels.
• Air Band Service – Allows you to search the aircraft frequencies at the press of a button,
and to choice the step from 12.5 kHz or 8.33 kHz.
• Unique Data Skip – Allows your scanner to skip unwanted data transmissions and
reduces birdies.
• Memory Backup – If power is disconnected, the frequencies programmed in your scanner
are retained in memory.
• Direct Channel Access – Go directly to any channel without entering the Menu mode.
• Attenuator – Reduces the signal strength on a per frequency basis.
• Turbo Search – Increases the search speed to 300 steps per second. This applies only to
transmission bands with 5 kHz steps.
• Text Tags – You can customize your scanner by storing text tags (up to 16 characters).
• Auto Store – The scanner automatically stores found active frequencies into an assigned
bank.
• CTCSS/DCS – The scanner can receive and search for subaudible tones.
10
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 10